Divx Subtitle; Changing The On-Screen Display - Denon Professional DN-V100 Operating Instructions Manual

DISC PLAYBACK
• Folders are known as Groups; files are known as tracks.
• A symbol of is shown on the top of DivX
• Maximum of 255 folders can be recognised.
• Maximum of 999 files can be recognised.
• If the track extends beyond the scope of screen, a
down arrow "L" appears, indicating that the user can
view another part on the previous page. The current
page number and the number of total pages are shown
on the left of the down arrow "L".
• The name of group and track can be displayed up to 25 char-
acters. Unrecognisable characters will be replaced with aster-
isks. The ninth and deeper hierarchies cannot be displayed.
• You can play back the disc recorded in multi-session.
• Playback will be paused if the file list is displayed dur-
ing the playback.
• It may take a while for audio and images to be output
after you inserted a disc and pressed the PLAY button.
• When playing back the files recorded in high bit rates,
the images can be interrupted in some occasions.
• Although DivX ® logo has been obtained for this player, it
may not be able to play back some data, depending on the
disc characteristics, bit rates, or audio format settings, etc.
• Use the software recognised by DivX
make DivX ® files.
• When using tools or utilities to make up DivX
read their instruction manual beforehand.
• A DivX ® file whose file size exceeds 2GB cannot be
played back.
• If a large-sized DivX ® file is selected, it may take a while
to start the playback (over 20 seconds sometimes).
• Constant bitrate of image between 500 kbps and 1,500 kbps
is recommended if you make DivX
• If DivX ® files wrote on CD discs cannot be played back,
rewrite them on a DVD disc and try to play back.
• For more information for DivX
http://www.divx.com
• If you insert a CD-R/RW with DivX
with MP3, JPEG, or WMA files, the Playback Media
Selection screen will be displayed. Please select Video
and proceed to Step
Please select the media to play back.
Video
Audio & Picture
• Press the TOP MENU button to call up the Playback
Media Selection screen in stop mode.
• If you select Audio & Picture, instead of Video on the
Playback Media Selection screen, the DVD player can play
back MP3/JPEG/WMA files. Refer to page 21 for details.
DivX ® Subtitle
The subtitle created by the user can be displayed during
DivX ® playback.
1
After select the DivX ®
appear except when the "DivX SUBTITLE" setting
is "OFF". Refer to "Language Setting" on page 26.
FILE :
file name1
[OFF]
[SMI]
[SRT]
[SUB]
file.
®
, Inc. when you
®
® files,
® files on a CD-R/RW.
® , please visit:
® files that are mixed
1
.
DivX
file, the SUBTITLE LIST will
SUBTITLE LIST
FILE LIST : MENU
2 Press the Cursor buttons (K or L) to select the
desired extension you want to display, then press
the ENTER button. DivX
playback. The subtitle cannot be displayed when
the setting is "OFF".
• If there is more than one extension, the extension
selection appears in the SUBTITLE LIST.
NOTES:
• DivX ® subtitle can only be displayed according to the
same name with an extension of the DivX
• Files whose extension is other than ".SMI", ".smi",
".SRT", ".srt", ".SUB" and ".sub" will not be listed in the
SUBTITLE LIST.
• This unit cannot be recognised if the DivX
subtitle file are not in the one folder.
• The subtitle may not be displayed if the file size is too large.
• To change the subtitle, refer to "Subtitle Language" on
page 25 if multiple subtitles are available.
• The subtitle cannot display if the on-screen information is
displayed.
• If "DivX SUBTITLE" is set to "OFF" in LANGUAGE
menu, the SUBTITLE LIST will not be displayed even if
you select a DivX
• Unrecognisable characters will be replaced with asterisks.
This player recommends the use of files recorded at the fol-
lowing specifications:
Applicable DivX ® file
Plays all versions of DivX
Playable
video (including DivX
Codec of AVI
with standard playback of
files
DivX ® media files.
Maximum size 720 x 480 @30fps
of image 720 x 576 @25fps
Sampling
frequency of 8kHz - 48kHz
audio
MPEG1 audio layer 3
(MP3)
Audio type
MPEG1 audio layer 2
Dolby Digital

Changing the On-Screen Display

You can check information about the current disc by pressing
the DISPLAY button.
1
Press the DISPLAY button during playback.
• Current chapter number/total
chapters, elapsed time and
remaining time of the current
chapter, and current playback
status will be displayed.
2
Press the DISPLAY button again.
• Current title number/total titles, elapsed time and
remaining time of the current title, and current playback
status will be displayed.
3
Press the DISPLAY button for the third time.
®
• The bit rate (the amount of
audio and video data currently
being read) and current play-
back status will be displayed.
• Current repeat setting appears on the display bar only
when the repeat setting is active.
( C: Chapter repeat/
• If you are playing back a two-layered disc, the layer
number will also be displayed.
(L0: Layer 0 is being played back. L1: Layer 1 is being
played back.)
4
Press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI output
mode. (Refer to NOTE FOR HDMI DISPLAY on page 24.)
5 Press the DISPLAY button again to exit.
– 23 –
® with the subtitle starts
® file name.
® file and its
® file with created subtitle.
Remarks
®
® 6) • They are recognised as
MPEG 4.
• It is prohibited to record
MP3 sound on a digital
device when the connec-
tion is made digitally.
• MP3 files recorded at
fixed bit rate of 32 kbps
or higher are recom-
mended.
9/49 0:00:00 -0:03:30
IIIIIII
T
T: Title repeat/A B: A-B repeat)
DVD
L1
EN