Table of Contents
Advertisement
6 electrolux
fabrics from creasing. Before opening the
door it will be necessary to empty out the
water. To empty out the water, please read
the paragraph «At the end of the pro-
gramme».
Prelavaggio
By selecting this option the machine per-
forms a prewash cycle before the main
wash phase. The washing time will be pro-
longed. This option is recommended for
heavily soiled laundry.
Extra Risciacquo
This appliance is designed for saving ener-
gy. If it necessary to rinse the laundry using
an extra quantity of water select this option.
Some additional rinses will be performed.
This option is recommended for people
who are allergic to detergents, and in areas
where the water is very soft.
Delay
The programme can be delayed from 30
min - 60 min - 90 min, 2 hours and then by
Display
The display shows the following information:
7.1:
• Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample 2.05 ). The duration is calculated
automatically on the basis of the maxi-
mum recommended load for each type of
fabric. After the programme has started,
the time remaining is updated every mi-
nute.
• Delayed start
1 hour up to a maximum of 20 hours by
means of this button.
Avvio/Pausa
This button allows you to start or to inter-
rupt the selected programme.
Time Manager
These buttons allows you to modify the pro-
gramme duration automatically proposed
by the appliance.
Door locked pilot light
The pilot light 9 illuminates when the pro-
gramme starts and indicates if the door can
be opened:
• light on: the door cannot be opened. The
• light off: the door can be opened. The pro-
• light flashing: the door is opening
7.4
7.5
7.3
7.2
• Alarm codes
• Incorrect option selection
machine in working or has stopped with
water left in the tub.
gramme is finished or the water has been
emptied out.
7.1
The Selected delay set by pressing the rel-
evant button appears on the display for a
few seconds, then the duration of the se-
lected programme is displayed again.
In the event of operating problems, some
alarm codes can be displayed, for exam-
ple E20 (see paragraph «What to do if...»).
If an option which is not compatible with
the set wash programme is selected, the
message Err is displayed at the bottom
Advertisement
Table of Contents
