What To Do If; Remedying Small Malfunctions - AEG FAVORIT 44050 Vi User Information

5. Remove the flat filter (3) from the
base of the washing compartment
and clean both surfaces thoroughly.
6. Re-insert the flat filter.
7. Place the fine filter in the micro-fil-
ter and fit the two together.
8. Insert the filter system in place and
lock it by turning the handle clock-
wise as far as it will go. Ensure that
the flat filter does not protrude
above the base of the washing com-
partment.
1
Under no circumstances may the dishwasher be used without its filters.

What to do if...

Remedying small malfunctions

If the acoustic signal is activated, warning tones sound if there are
faults.
If while the appliance is operating indicators on the control panel flash
or are lit up as described in the following table, please consult this to
find out how to remedy the fault.
After remedying the fault that is flashing in the first or second
rhythm in the programme progress display, press the button for the
dishwashing cycle that had already started. The cycle will continue.
If the fault is displayed again or if other faults are displayed, please
contact your local Service Force Centre and inform them of the fault
display.
23