Chapter 4 Configuring The Vip-152T Through Telnet Command Lines; Help] Command - Planet SIP IP Phone User Manual

Configuring the VIP-152T through Telnet
After setting up the network parameters of VIP-152T, you may now enter the Telnet command lines for more
options in machine configuration.
• After user enter VIP-152T configuration via telnet, please use login: "root", password: null,
press enter to enter command lines.
?
• User must input lower-case command, but contents of configurations such as SIP alias or
Note: user name etc, user can set as capital case.
• After any change of configuration, please remember to do commit command to save
changes and then reboot command to reboot system.

4.1. [help] command

Type help or man or ? to display all the command lists. The following figure is shown all commands of
VIP-152T.
help help/man/? [command]
quit quit/exit/close
debug show debug message
reboot reboot local machine
pbook Phonebook information and configuration
commit commit flash rom data
ping test that a remote host is reachable
time show current time
ifaddr internet address manipulation
pppoe PPPoE stack manipulation
flash clean configuration from flash rom
sysconf System information manipulation
sip SIP information manipulation
security Security information manipulation
voice Voice information manipulation
tos IP Packet ToS (Type of Service)values
bureau Bureau line information manipulation
rom ROM file update
passwd Password setting information and configuration
usage: help [command]
usr/config$
PLANET VIP-152T User's Manual
command lines
29
Chapter 4