Advertisement
This chapter shows you the starting point of VIP-152T to be integrated into your network
and/or Internet. Configuration steps in this quick guide will be focused on keypad
configuration. More detail configuration, including keypad, web, and telnet instructions
will be illustrated in respective chapters in user's manual.
2.1 Initialize VIP-152T
2.1.1 Start up
Power on VIP-152T, and wait about 15 seconds until VIP-152T finishes boot program
initialization.
Then VIP-152T will come into standby mode: The main LCD screen would be shown as
similar as following. The P2P word means VIP-152T is now in Peer-to-Peer Mode, and
when VIP-152T is connected to SNTP server, on LCD will show current time obtained from
SNTP server.
2.1.2 LCD configuration
Most functions may be directly configured via keypad operations in VIP-152T.
You may press ç or è to enter machine configuration menu. The OK button is used to
enter sub menus or confirm settings press FLASH can jump out current menu to previous
level.
G
Hint
VIP-152T has following configuration menus in the LCD control panel:
1. Call List
2. Forward
3. Phone Book
VIP-152T
P2P
• The REDIAL/HOLD key can be used to switch characters
between capitals and lowercase.
• Press MUTE before input data can switch input mode to
be character mode or IP mode; for example, user wants
to enter IP address, after pressing SPEED can enter digits
directly.
• When user is inputting data, press p will clear previous
input data.
Basic Configuration
10:10:10 AM
Chapter 2
5
Advertisement
