Automatic Updates - Doro ip810c Manual

Methods
Firmware updates can be conducted using the following methods:
Only for advanced users or system administrators:
1. Manual TFTP update: Exceptional situations or downgrade, see page 12
2. Manual update/downgrade: Most convenient when updating/downgrading within the
same major release level, e.g. 6.X: from version 6.2.3 to 6.5.10, etc.
Note: We do not recommend manual updates between different major release
levels, e.g. from 3.X/4.X/5.X to 6.X or 6.X to 7.X. Use
instead.
3. Automatic update: This method updates your phone firmware to the current official
release.
Manual update
Note: This method requires an internet connection.
The manual update is conducted via the phone's web user interface.
Version Check
Action: Check the firmware version currently installed on your phone
ip810c
ip810c-SIP X.Y.Z
Enter the settings
menu (see page 24) and
navigate through the
menu (see page 21) until
the following screen is
displayed:
Information
Version
Press
Version:
s300-SIP X.Y.Z
Result: The firmware version currently installed on your phone is displayed.
User Manual - English
ip820c
Status  System Information  System Information  Application-Version:
ip820c-SIP X.Y.Z
Information
IPAdr MAC Version
Version
Press
Version:
ip820c-SIP X.Y.Z
ip830c
ip830c-SIP X.Y.Z
or
Press
Help
———— About ————
ip830c-SIP-X.Y.Z
IP Adr: X.X.X.X
MAC: 0004132XXXXX
S4
4 6

automatic updates

ip840c
ip840c-SIP X.Y.Z
Info time
ip840c-SIP-X.Y.Z
IP Adr: 192.168.0.10
MAC: 0004132XXXXX