SIP Identity Configuration Tasks
Doro VoIP phones support multiple extensions (SIP identities). Each extension will act like a
separate phone line in a conventional telephony system. As soon as the extensions have been
registered (see page 18), calls can be placed from and received to these extensions.
ip810c
4 extensions
(SIP Identity 1...4)
Note: We recommend using the web user interface to perform the following
configuration changes as it is more convenient:
Use only the logon information provided by your VoIP PBX administrator or
Internet Telephony Service Provider (ITSP).
For further information read the instructions in our administrator manual.
http://www.doro.com/voipsupport/ip8X0c/
Adding / Editing Extensions
Action: Add a new extension "X" / Edit existing extensions "X"
ip810c
Registrar (SIP Domain/ Server), e.g. .company.com, 192.168.0.100, etc.
Note: This action requires a reboot of your phone (see page 28)
Result: After the phone has rebooted a new extension has been added to your phone
configuration which can be used to place or receive calls. See page 51.
Blocking Extensions
Action: Block an extension (SIP identity) temporarily
ip810c
Result: The chosen extension (SIP identity) is blocked for both outgoing and incoming calls.
All configuration settings are kept unchanged.
User Manual - English
ip820c
ip820c
Verify the status and availability of your extensions:
Status System Information SIP Identity Status
Add / Edit the following identity information
Setup Identity "X" Login Tab Login Information
Account (SIP Username), e.g. 100, turner, smith1, etc.
Password (SIP Password)
Save your changes by clicking Save
ip820c
Setup Identity X Login Tab Login Information Identity active: <OFF>
ip830c
12 extensions
(SIP Identity 1...12)
Setup
ip830c
ip830c
3 7
ip840c
Identity X.
ip840c
ip840c