Ducati SUPERBIKE 1198 Owner's Manual page 17

At Key-On, the instrument panel always shows the following
information (de-activating any previously activated functions,
E
with the exception of the Traction Control function):
Odometer
Air temperature
Clock
Speed
Coolant temperature
Engine rpm
At this point, with switch (1, fig. 10) in position B "▼", it is
possible to switch from the Odometer (TOT) display
function to the following functions:
TRIP A
TRIP B
TRIP FUEL (only if active)
DTC (only available if Traction Control is both present and
activated) before returning to the Odometer (TOT) function.
If, however, you press button (1, fig. 10) in position A "▲",
the system enters MENU mode and displays the following
functions in sequence:
Error (only if at least one error is present)
BATT
RPM
LAP (OFF or ON)
LAP MEM
DDA (OFF or ON)
Erase DDA
DTC OFF/ON (only active if Traction Control is present)
16
DTC Setup (active only if DTC is activated)
TIME Set
CODE (only if active)
Important
This menu is active only if the speed of the motorcycle
is less than 20 km/h. If this menu is on the display and the
speed of the motorcycle exceeds 20 km/h, the instrument
panel automatically exits the menu and returns to the initial
display. It is possible to exit the menu at any time, however,
by pressing switch (1, fig. 10) in position A "▲" for 3 seconds.
A
1
B
fig. 10