Adjusting Stretch Stitch Balance; Stitch Width; Variable Needle Position - Husqvarna Viking Emerald 122 User Manual

a
1
b
2
Adjusting stretch stitch
balance
If the stretch stitches are unbalanced
when you sew on a particular fabric,
balance them by turning the stitch length
dial, within the stretch range.
To adjust the distorted stitches:
If the stitches are spread out (a),
correct them by turning the dial in the
"–" direction. If the stitches are close
together (b), correct them by turning the
dial in the "+" direction.

Stitch Width

Turn the stitch width dial to set the
desired stitch width number at the
setting mark.
The higher the number, the wider the
stitch.
1 Stitch width dial
2 Setting mark
Always raise the needle above the
NOTE:
fabric and presser foot before you turn
the stitch width dial.

Variable needle position

The needle position of the straight
stitches can be varied between the center
(5) and left (0) with the stitch width dial.
19