Bosch BX3 Instructions For Use Manual page 19

Cleaning the filter
Clean the micro filter by knocking out the dirt.
If the micro filter is very dirty, it should be rinsed out.
Replace the micro filter.
Close the exhaust filter cover.
Insert the dust container into the appliance and
engage it in position.
Fold the dual separator back and engage it in
position.
! Attention: The filter must be completely dry
before it is refitted in order to ensure that it
functions correctly and to prevent the formation
of odours or bacteria.
The micro filter may be ordered from customer
service.
Replacement part number: 427226
Replacing the micro active carbon filter
Unlock the dual separator and fold it away to the
front.
Unlock the dust container and remove it from the
appliance.
Open the exhaust filter cover as far as possible in
the direction of the arrow. The cover engages in this
position.
Remove and dispose of the micro active carbon
filter.
Fit a new filter (BBZ192MAF )
Close the exhaust filter cover.
Insert the dust container into the appliance and
engage it in position.
Fold the dual separator back and engage it in
position.
19