Display - Planet DVR-460 User Manual

The submenu tems are d scribed below: i
1) TITLE
Show the camera title of each channel
2) DEVICE
Select the device type (CAMERA / PTZ) according to the
channel.
3) ID
Set the ID number (0 ~ 255) for a PTZ camera.
Afte r connecting to a PTZ camera correctly, the default ID of the PTZ camera will be
shown on the screen.
4) PROTOCOL
Select NORMAL (our protocol) or P-D (PELCO-D) protocol.
5) RATE
Set the baud rate of each channel (2400 / 4800 / 9600 / 19200 / 57600). For the
connec ted cameras, such as PTZ and speed dome cameras, etc., please make sure
their baud rate setting is the same as the setting here.

7.4 Display

In this menu lis t, you can check and change some display settings.
M ove the cursor to "DISPLAY", and press "ENTER". You will see a similar screen as the
following:
ADV ANCE
CAMERA
DETECTI ON
REMOTE
DISPLAY
ALERT
SYSTEM
NETWORK
BACKUP
HDD INFO
EVENT LOG
The submenu items are described below:
1 ) DE-INTERLACE
Select to enable or disable "DE-INTERL
2) FULL SCREEN D
Set the full screen dwell duration time (3 / 5 / 10 / 15 seconds).
4-CH MPEG-4 Digital Video Recorder
e
DE-INTERLACE
FULL SCREEN DWELL DURATION (S
CHANNEL TITLE
EVENT STATUS
DATE DISPLAY
PLEASE CONSU
SELECT
WELL DURATION (SEC)
set in "CAMERA".
connected camera for each
DISPLAY
EC)
LT YOUR INSTALLER FOR ADVANCE SETTING
BACK NEXT ENTER
ACE" function (ON / OFF).
ON
03
ON
ON
ON
31