Memory Erase; Speed Dialing - AT&T TRIMLINE 210 User Manual

Speed Dialing

Ten telephone numbers can be stored in standard
speed-dialing locations. You can dial any of these
numbers by pressing two buttons.
To program numbers into memory
1 Lift the handset.
2 Press PROG/MUTE
3 Press MEM
4 Enter a digit (0-9) for the memory location where
the number is to be stored.
5 Enter telephone number. You will hear a click
when each button is pressed.
6 Press PROG/MUTE
7 Hang up after the number is entered correctly.
8 Repeat Steps 1–7 to store another number.
To dial
1 Listen for dial tone.
2 Press MEM
3 Press memory location (0-9).

Memory Erase

To erase any number from memory, you can enter
another number in the same location.
.
.
.
.
9