Playing Vhs Tapes; Special Vcr Playback Features - GoVideo VR2940 User Manual

3 - Playback (cont.)

Playing VHS Tapes

Before you begin:
• Press the VCR button to set the remote
control to operate the VCR deck.
• Turn the TV on and select the video
input source connected to the DVD
Recorder+VCR.
• Turn your audio system on and select
the input source connected to the DVD
Recorder+VCR.
1
Insert a videotape in the VCR deck.
• The DVD Recorder+VCR will power on
automatically.
• If a tape without a record safety tab is
inserted, the DVD Recorder+VCR will
start playback automatically.
2
Press PLAY/PAUSE
3
Press STOP to stop playback.

• If the tape reaches the end before
STOP is pressed, the DVD

Recorder+VCR will automatically stop,
rewind, and eject the tape.
.

Special VCR Playback Features

Auto Tracking
The automatic tracking function adjusts the
picture to remove snow or streaks. It works in
the following cases:
• When a tape is played for the first time.
• When the tape speed (SP, SLP) changes.
• When streaks or snow appear because of
scratches on the tape.
Manual Tracking
If noise appears on the screen during playback,
press the TRACKING +/- buttons on the
remote control until the noise on the screen is
reduced.
Visual Search Forward/Backward
• Press REW or FF

to scan forward and backward at variable
speeds.
Still Picture
• Press PLAY/PAUSE
pause the on-screen image.
• If the picture vibrates, stabilize it by using
the TRACKING +/- buttons.
Slow Motion
• Press SLOW+ for slow motion playback.
• Press SLOW+ and SLOW- repeatedly to
adjust the slow motion playback speed.
Counter Memory Function
• Press CLEAR to reset the real-time counter
to 0:00:00.
• To automatically search for a specific tape
counter position, use the Go-To Search
function; see page 36.
20
during playback.

during playback to