ProForm 710 Ekg Bike User Manual page 6

5. While another person holds the Console (6) near the
Upright (3), connect the console wire harness to the
Upper Wire Harness (32).
Insert the excess Upper Wire Harness (32) downward
into the Upright (3). Attach the Console (6) to the
Upright with four M4 x 15mm Screws (40). Be careful
to avoid pinching the wires.
6. Attach the Water Bottle Holder (29) to the Upright (3)
with two M4 x 15mm Screws (15).
7. Orient the Handlebar (47) as shown. Attach the
Handlebar to the Upright (3) with the Upright Clamp
(45) and the Adjustment Handle (46). Note: The
Adjustment Handle works like a spanner. Turn the han-
dle clockwise, push it toward the Handlebar, turn it
counterclockwise, pull it away from the Handlebar, and
then turn it clockwise again.
5
Console Wire
Harness
40
40
6
15
29
3
7
3
6
3
32
6
Be careful to avoid
pinching the wires
47
45
46