ProForm 700 Gx Treadmill User Manual page 7

2. Attach six Base Pads (125) (only four are shown) to the
bottom of the Base (131) with six 1" Tek Screws (126).
With the help of another person, carefully tip the treadmill
down so the Base Pads (125) are resting on the floor.
3. Attach a Wheel (62) to the right side of the Base (131)
with a Wheel Bolt (134) and a Wheel Nut (135) as shown.
Attach the other Wheel (not shown) to the left side of the
Base (131) in the same way.
4. Attach the Latch Assembly (110) to the Left Upright
(111) with two Latch Screws (31). Be careful not to
overtighten the Screws. Note: It may be necessary to
remove the Screws from the Left Upright before begin-
ning this step.
2
125
126
131
3
135
4
7
125
126
125
131
134
62
111
110
31
126