Table of Contents
Advertisement
VCR Operation Setup
On-Screen Display (OSD)
The OSD provides feedback during VCR operation.
❶
❷
PLAY
SP
JUL 5 , SAT
❺
❶ TAPE SPEED DISPLAY
Shows the current tape speed.
❷ FUNCTION DISPLAY
Indicates the function in progress.
❸ CHANNEL DISPLAY
Indicates the selected channel (or AV).
❹ DATE DISPLAY
Shows the current date (month/date/day of the week).
❺ CLOCK/COUNTER/REMAIN DISPLAY
Shows the current time, the tape counter and remaining time
on the tape.
Each press of the ENTER button changes the
on-screen display in the following sequence:
STOP
CH 4
SP
JUL 5 , SAT
2:15 PM
2:15 PM
otes
On-screen displays appear for ~5 seconds.
The clock, tape counter, and tape remaining modes will
remain on-screen until you press ENTER.
The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remaining
tape length indicator appears after any tape operation.
14
❸
CH 4
2:15 PM
❹
0:35:40
REM 1:58
EASY INFORMATION
If Extended Data Service (XDS) signals are provided
along with the normal TV signal in your area or during
playback of a tape recorded with XDS signals, the sta-
tion ID, program title, and program details are shown on
the TV screen.
When viewing a channel with XDS signals, press ENTER
and the station ID will appear on the TV screen. Press
ENTER again and the program details will appear on the
TV screen.
When viewing a tape recorded with XDS signals, press
ENTER twice and the program title and program details
will appear on the TV screen.
PROGRAM DETAILS
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are not
applicable to this program.
CH 4
SP
WABC
"Home video"
JUL 5 , SAT
2:15 PM
Easy Information Screen
(Station ID)
On-Screen Menus Setup
The DVD+VCR on-screen menu system provides con-
venient access to Clock, Program, Tuning, and Setup
options.
Menu Selection
Your VCR allows remote control adjustment of several
features.
Press MENU to display the MAIN menu.
1 1
Select the desired menu with the v/V buttons
2 2
and then press ENTER.
ote
Menus remain on-screen for 3 minutes.
MAIN MENU
Press MENU when finished.
3 3
PROGRAM DETAILS
"Home video"
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
Easy Information Screen
(Program details)
CLOCK SET (page 16)
PROGRAM (page 22)
TUNING (page 15)
SETUP (page 15)
Hide quick links:
Advertisement
Table of Contents
