The Setup Menu; System Setup - GoVideo YGD2917HDMI Instruction Manual

The Setup Menu

• Press the SETUP button to display the DVD Player's setup menu.

System Setup

TV System Select the TV system that's consistent with the connected television. NTSC is the standard
TV System setting for the U.S.A., Canada, and Mexico.
Video
• Interlaced YUV (Composite Video Out) The Setting is an advanced setting that takes advantage
of the Composite Video Outputs.
• S-Video Select the S-Video option to use the S-Video Output as the unit's primary video output.
• P-Scan YPBPR (Component Video Out) The P-Scan (Progressive Scan) setting is an advanced
setting that takes advantage of the Component Video Outputs, and produces a higher quality image
output.
• Press the Video button on the remote control to cycle through S-Video, Interlaced YUV, and P-
Scan YPBPR.
Screen Saver The Screen Saver should be turned on to avoid burn-in on the television.
TV Type The ratio of the width of an image to its height.
• 4:3PS The 4:3PS (Pan & Scan) ratio shows the DVD movie in full screen on a Standard TV.
• 4:3LB The 4:3LB (Letterbox) ratio shows the DVD movie in a original format, but with black
bars at the top and bottom to fits on a standard TV screen.
• 16:9 The 16:9 ratio shows the DVD movie in its widescreen format. Use this setting when view-
ing a movie on a widescreen TV.
Default The Use Default button will change all settings back to the original factory defaults.
SYSTEM SETUP
TV SYSTEM
VIDEO
SCREEN SAVER
TV TYPE
DEFAULT
EXIT SETUP
SY ST EM SE TU P
TV SY ST EM
VI DE O
SC RE EN SA VE R
TV TY PE
DE FA UL T
EX IT SE TU P
9