Activating the service menu
1. Turn on the car radio and press the AUX key to enter the
AUX menu.
2. Now press the following keys one after another: 9, 5
and 7. After approximately 8 sec. the service menu will
appear on the screen.
3. Use the following keys to make and select settings in the
service menu:
/
and
/
S-key
TIM key
Distance calibration
1. Use the
/
keys to move the cursor to the line System
Einbau and press the S-key twice.
2. The entry menu for specifying the distance appears in the
display.
3. Use the
/
keys to move the cursor to the desired
digit and press S to confirm. Repeat this process until the
appropriate distance value is shown in the display (in this
example 160,0 m).
4. Now keep the S-key depressed for at least 5 sec. and re-
lease. Then follow the information given in the display.
5. Use the menu item Navigation to quit the service menu af-
ter the calibration has been completed.
Service Menu
- Change language
- System install.
- System- diagnosis
- Navigation
Subject to modification!
Moves the cursor.
Confirms your selection (Enter).
To page back through the menus.
Service-Menü
Select national language
Default = German
Leaving the service
menu(reactivate
standby time!)
S
AUXILIARY MENU
1
NAVI
2
3
4
5
S
Service menu:
Change language
> System install.
System diagnosi
Navigation
S
Test stretch
(min. 100 m):
0123456789
System install.
- Strech calibr.
- Sensor- test
- GPS status
System diagnosis
- Calibration values
- Error memory
- Hardware test
- Sensor test
- Strech calibr.
- GPS status
- Keyboard test
- 6 -
EXIT
160,0 m
Enter test stretch in m.
(min. 100 m)
and drive stretch
Display values:
Gyro, wheel sensor,
speedometer, km/h, direction
Display instantaneous
GPS data
Leave the system diagnosis
level by pressing the TIM
button.
Leave the system diagnosis
level by pressing the TIM
button.
6
7
8
9
:
8 622 401 437