Radio Mode; Switching To Radio Mode; Convenient Rds Functions (Af, Reg); Selecting The Frequency Range / Memory Bank - Blaupunkt WOODSTOCK DAB52 Operating Instructions Manual

RADIO MODE

Radio mode
This unit is equipped with an RDS radio
receiver. Many of the receivable FM sta-
tions transmit a signal that not only car-
ries the programme but also additional
information such as the station name
and programme type (PTY).
The station name appears in the dis-
play as soon as it is received.

Switching to radio mode

If you are in CD, CD changer or AUX
mode,
press the FM•AM•T button 5.
Convenient RDS functions
(AF, REG)
The convenient RDS functions AF (Al-
ternative Frequency) and REG (Region-
al) extend your radio's range of func-
tions.
AF: If this RDS function is activat-
ed, the unit automatically tunes into
the best receivable frequency for
the station that is currently set.
REG: At certain times, some radio
stations divide their programme
into regional programmes providing
different content. You can use the
REG function to prevent the car ra-
dio from switching to alternative
frequencies that are transmitting
different programme content.
Note:
REG must be activated/deactivated
separately in the menu.
56
Switching REG on/off
Press the MENU button 8.
Keep pressing the
: until "REG" appears in the dis-
play. "OFF" or "ON" is displayed
alongside "REG".
To switch REG on/off, press the
button :.
or
Press the MENU button 8 or OK
;.
Switching the RDS function on/off
To use the RDS functions (AF and
REG), press the RDS•SF button
?.
The RDS functions are active when
"RDS" lights up in the display with a
symbol. When the RDS functions are
switched on, "REG ON" or "REG OFF"
appears briefly in the display.
Selecting the frequency range /
memory bank
This unit can receive programmes
broadcast over the FM frequency range
as well as the MW and LW (AM) rang-
es. There are four memory banks for
the FM range and one for each of the
MW and LW ranges.
Five stations can be stored in each
memory bank.
Briefly press the FM•AM•T button
5 to switch between the memory
banks and frequency ranges.
or button