Table of Contents
Advertisement
Pyrolytic cleaning
Warning: The oven gets very hot during this process. Keep small chil-
dren away.
Important! All removable parts including the side rails must be re-
moved from the oven before using the pyroluxe function.
If you use the oven shelf runners that are available as special accesso-
ries, these must be removed before pyrolytic cleaning.
If the side rails/oven shelf runners are still in place, 'C1' appears in the
time display.
The pyroluxe process then cannot be started due to a safety cut-out
that protects the side rails/oven shelf runners.
Pyrolysis
1. First remove the worst of the residue manually.
2. Select oven function Pyroluxe
– "3:15" appears in the time display,
– Continuously flashes for approximately 5 seconds.
Pyrolytic cleaning then starts.
The Light does not work.
When the temperature set is reached, the door is locked.
The bars of the heat indicator are illuminated until the door is unlocked
again.
Changing the length of the Pyroluxe
1. Proceed as described in the section Pyroluxe
2. While Cook time
using
or
"2:15"or "3:15".
Cook time
Pyrolytic cleaning then starts.
If Cook time
and then perform the setting procedure.
Changing the Pyroluxe switch-off time
The Pyroluxe switch off time can be changed using the End time
clock function (within 2 minutes of setting the Pyroluxe).
When are the different pyroluxes set:
P2 - 2:15 = Pyroluxe Quick: For a light degree of soiling,
P1 - 3:15 = Pyroluxe Intensive: For a heavy degree of soiling.
is flashing select the desired length of the pyroluxe
:
flashes for approximately 5 seconds.
is no longer flashing, press the Select
.
button again
37
Advertisement
Table of Contents
