Tilt Support Lever; Top Cowling Lock Lever; Flushing Device - Yamaha F50A Owner's Manual

E
EMD60010

TILT SUPPORT LEVER

To keep the outboard motor in the tilted-
up position, lock the tilt support lever to
the clamp bracket.
000971
EMD62110

TOP COWLING LOCK LEVER

To remove the engine top cowling, pull
up the lock lever. Then lift off the cowling.
When replacing the cowling, check to be
sure it fits properly in the rubber seal.
Then lock the cowling again by moving
the lever downward.
301011
EMU01146

FLUSHING DEVICE

This device 1 is used to clean the cooling
water passages of the motor using a gar-
den hose and tap water.
NOTE:
Refer to "Cleaning Cooling-water Pas-
q
sages" in Chapter 4 for instructions on
usage.
000280
2-12