Advertisement
Error:
yes
Run the „sensor - emulator test" on
the basic navigation unit.
no
Replace the basic navigation unit and
do a complete calibration.
Regular locating loss even after a short drive
Load the installation disk.
Select „find compass location", then select
„compass ellipse".
Drive the vehicle in a circle.
Is there an ellipse visible on the screen inside
the squares?
yes
Install the magnetic field sensor, lay
the wiring.
Do a complete calibration on the basic
navigation unit.
Replace the magnetic field sensor.
Repeat the „compass ellipse" test.
Is there an ellipse visible on the screen inside
the squares?
Replace the basic navigation unit and
do a complete calibration.
- 15 -
no
no
Advertisement
