AEG Electrolux FAVORIT 88070 VIL Instruction Book page 14

152954 73/0en 24-08-2005
Operating instructions
a) Setting manually
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness dial to
position 1 or 2 (see table).
4. Replace the lower basket.
The dishwasher is factory set at
position 2.
b) Setting electronically
NOTE: the electronic setting of the water softener is possible ONLY
with the 3 in 1 function deactivated.
The dishwasher is factory set al level 5.
1. Press the option selection button.
2. Press the direction buttons until SETTING . . . is displayed.
3. Press the ok start button.
4. Press the direction buttons until WATER HARDNESS is displayed.
5. Press the ok start button.
6. Press the direction buttons until the level corresponding to
hardness of the water in your area is displayed.
7. Press the ok start button to confirm the setting.
8. Press the option selection button to exit the Option menu.
14
8:45 Pagina 14