Table of Contents
Advertisement
152954 73/0en
24-08-2005
Operating instructions
MENU
LANGUAGE
WATER
HARDNESS
RINSE AID
(this option can
be selected ONLY
with the 3 in 1
function active)
SOUND
VOLUME
BRIGHTNESS
5. Press the ok start button: the option is memorised.
6. For each option it is necessary to repeat the setting from point 2.
7. To exit from menu, press option selection button.
If a programme has been set:
- press ok start button and close the door: the programme will
start automatically.
If a programme has not been set:
- press direction buttons until is displayed the desired washing
programme
- press ok start button and close the door: the programme will
start automatically.
The options can only be set before the start of a washing
programme.
Once set, these options will remain activated for the following
cycles, until they will be deactivated, except for DELAY START
10
8:45
Pagina 10
SUBMENU
Allows you to view messages that appear in the display
in the required language. (Factory setting: english).
Allows you to set electronically the water softener
according to the hardness of the local area water:
water hardness is measured in 10 levels.
Allows you to deactivate or activate the rinse aid
dosage:
- ON rinse aid dosage activated,
- OFF rinse aid dosage deactivated.
Allows you to adjust the volume of the alarm signals
and of the end of programme signal (from 0 to 5).
Level 0 means the deactivation of the volume of all
signals and the symbol
Allows you to increase or decrease the brightness of the
background of the display, 10 different levels can be
selected.
appears in the display.
Advertisement
Table of Contents
