Inserting the Oven Grille, Tray, and All-Purpose Tray
Anti-tip device
3
All trays and grilles have a little curve on the left and right edges.
This curve serves as an anti-tip device and must always be turned to-
wards the back of the oven.
Inserting the grille:
Insert the grille at the desired level.
Inserting the tray and all-purpose
tray:
Insert the tray and/or all-purpose
tray at the desired level.
Inserting/Removing the Fat Filter
The fat filter protects the rear wall heating element against splashes of
fat when roasting.
Inserting the fat filter
Holding the fat filter by the tab, in-
sert the two retainers into the
opening on the rear wall of the
oven (fan opening) from the top
downwards.
Removing the fat filter
Take hold of the tab on the fat filter
and remove by pulling upwards.
Operating Instructions
19