Planet ICA-310 User Manual page 49

Present MDD: To enable or disable the MDD (motion detection data) function. The motion
object/area will be marked by red block while this function is enabled.
Window 1 to 4: User can specify up to 4 areas to monitor the image captured by this device.
By dragging mouse on the image, you can change the position and size of the window
accordingly.
Threshold setting slide bar: Define the threshold level of moving object detection that is
common for all the windows. The threshold level is used to judge whether or not there has
been any motion in the window. Move this bar to the right will increase the threshold. An alarm
is triggered when motion that exceeds the threshold level is detected in the window.
Move the slide bar to right will increase the threshold.
Power: Show the detected power of the motion detection within the specified window.
Sensitivity: Define the sensitivity value of motion detection. Move this bar to the right will
increase the sensitivity.
Move the slide bar to right will increase the sensitivity.
48/57