American Dynamics VideoEdge Installation & Operation Manual page 37

Description of function keys:
Enable DHCP:
IP Address:
Netmask:
Default Gateway:
Primary Nameserver: Enter the 4-byte DNS Server Address in the blank spaces provided
HTTP Port:
Submit:
36
Click "Enable DHCP" to checkmark the attached box and activate
the DHCP communication function. If provided with a DHCP server,
the IP camera can get an IP address automatically.
Enter the 4-byte IP Address in the appropriate blank space (the
value in each box may be anywhere between 0 and 255). Every IP
camera has to own an IP address to be identified on the network.
Enter the 4-byte Subnet Mask in the required blank spaces (usually
any numbers between 0 and 255). It is used to identify the subnet
where the IP camera is sited.
Enter the 4-byte Gateway in the relevant blank spaces (each unit
value must be between 0 and 255).
(each value unit must be between 0 and 255). The DNS Server is in
charge of translating the Domain Name into the IP Address.
Indicates the specific HTTP Port Number. The default is 80.
Click to submit the new network setting to the IP camera.
Installation & Operation Guide