Table of Contents
Advertisement
Main Menu – Remote Control and Front Panel Control
MENU
ESC
ENTER
5.2 Record Setup
Item
HDD FULL
Schedule - Record Normal
Schedule – Record Motion
Schedule – Record Sensor
Pre-Alarm Record
Audio Record
Video Preservation
Quality & Frame Rate
Setup...
Switch to different options under one item
Switch to different items
Save setup and back to LIVE mode
Back to Upper level of the menu
Enter the menu, or display virtual keyboard
Select STOP to stop recording or OVERWRITE to reuse the HDD when
HDD is full.
[Stop] ： Stop Recording
[Overwrite] ： Start to overwrite beginning from the oldest data of HDD,
and continue to record.
Enable/ Disable normal recording
Enable/ Disable recording while Motion is detected
Enable/ Disable recording while Sensor is triggered
Enable/ Disable pre-event recording while motion or sensor is triggered
but not in the recording mode. This option decides if save the
pre-recording time 10 seconds data or not.
Enable/ Disable Audio recording.
Information stored within the HDD is preserved for only a specified length
of time.
Setup the quality and frame rate for each channel under normal
recording and event recording type.
18
Description
Advertisement
Table of Contents
