Skirts - Jacuzzi K272000AF Installation And Operating Instructions Manual

Skirts

INTEGRAL SKIRT MOUNTING DETAIL
FINISHING
MATERIALS
CAULKING BEAD
SKIRT
PANEL
U FRAME SKIRT MOUNTING DETAIL
FINISHING MATERIALS
SECURE SHELL CLIP
UNDER CENTER
BATH RIM
FILLER (Optional)
SKIRT
PANEL
SECURE BOTTOM OF FRAME TO FLOOR
INSTALLATION INSTRUCTIONS
CAULKING
BEAD
SKIRT
FRAME
19
Corner Baths with Skirt
If an optional skirt is used on a corner bath, additional support is
necessary in the front of the unit. Measure the height from the floor
to the underside of the bath rim. Cut two 2" x 4" studs, apply adhe-
sive to both ends and install (See specifications in ROUGHING-IN
REFERENCE ).
(CORNER)
SUPPORT FOR CORNER BATHS
APPLY
ADHESIVE
2" x 4" STUD
(50,8 mm x 101,6 mm)
Removable Skirt Panel
Removal and Installation
To remove panel, grab a top corner of access panel and pull outward
to release the first Dual Lock fastener. Then work around the
perimeter pulling access panel outward to release the remaining
dual Lock fasteners.
To reinstall, align access panel such that the Dual Lock fasteners
on the access panel match to the Dual Lock fasteners on the tub
skirt. Engage each Dual Lock pair until all are snapped into place.
PEEL BACK CORNER
TO BEGIN DISCONNECTING
DUAL LOCK™ FASTENER
Jacuzzi Whirlpool Bath K272000AF 7/06
H