Safety Cut-Out - AEG Electrolux 67670 K-MN Installation And Operating Instructions Manual

Safety cut-out

Cooking surface
• If after switching on the cooking surface, a heat setting is not set for
a cooking zone within approx. 10 seconds, the cooking surface auto-
matically switches itself off.
• If one or more sensor fields are covered by objects (a pan, cloths, etc.)
for longer than approx. 10 seconds, a signal sounds and the cooking
surface switches off automatically.
• If all cooking zones are switched off, the cooking surface automati-
cally switches itself off after approx. 10 seconds.
Control panel
• When the appliance is switched off, if one or more of the sensor
fields on the control panel are covered for more that 10 seconds, an
acoustic signal sounds. The acoustic signal switches itself off auto-
matically when the sensor fields are no longer covered.
Induction cooking zones
• In the event of overheating (e.g. when a pan boils dry) the cooking
zone automatically switches itself off.
used again, the cooking zone must be set to 0 and allowed to cool
down.
• If cookware that is not suitable is used,
after 2 minutes the display for the cooking zone switches itself off.
all cooking zones
• If one of the cooking zones is not switched off after a certain time, or
if the heat setting is not modified, the relevant cooking zone switches
off automatically.
ing zone must be set to 0.
Heat setting
V, 1 - 2
3 - 4
5
6 - 9
is displayed. Before being used again, the cook-
Switches off after
6 hours
5 hours
4 hours
1.5 hours
is displayed. Before being
flashes in the display and
49