Hawking HWR54G User Manual page 74

802.11g hi-speed wireless-g router with 4-port switch
Hide thumbs Also See for HWR54G:
Table of Contents

Advertisement

Wireless Router User Guide
E-Mail Reports
Send E-mail alert
E-mail Logs
Send
E-Mail Address
E-mail Address
Subject
SMTP Server
Port No.
If enabled, an E-mail will be sent immediately if a DoS (Denial of
Service) attack is detected. If enabled, the E-mail address
information must be provided.
You can choose to have the logs E-mailed to you, by enabling
either or both checkboxes. If enabled, the Log will be sent to the
specified E-mail address. The interval between E-mails is
determined by the "Send" setting.
Select the desired option for sending the log by E-mail.
When log is full - The time is not fixed. The log will be sent
when the log is full, which will depend on the volume of
traffic.
Every day, Every Monday ... - The log is sent on the
interval specified.
If "Every day" is selected, the log is sent at the time
specified.
If the day is specified, the log is sent once per week, on
the specified day.
Select the time of day you wish the E-mail to be sent.
If the log is full before the time specified to send it, it
will be sent regardless.
Enter the E-mail address the Log is to be sent to. The E-mail will
also show this address as the Sender's address.
Enter the text string to be shown in the "Subject" field for the E-
mail.
Enter the address or IP address of the SMTP (Simple Mail
Transport Protocol) Server you use for outgoing E-mail.
Enter the port number used to connect to the SMTP Server. The
default value is 25.
68

Advertisement

Table of Contents
loading

Table of Contents