Whirlpool RF385PXP User And Care Manual page 15

3. Pull the surface unit straight away
from the receptacle.
Replacing
3. Hold the surface unit as level as
possible with the terminal just
started into the receptacle.
4. Lift out the reflector bowl and trim
ring.
See Cleaning Chart on page 2 1
for cleaning instructions.
2. Line up opening in the reflector
bowl and notch in the trim ring
with the surface unit receptacle.
4. Push the surface unit terminal into
the receptacle. When the terminal
is pushed into the receptacle as
far as it will go, the surface unit will
fit into the trim ring.