Lenovo ThinkCentre 8328Types 8341, 8344, 8382 User Manual page 37

2. Pivot the drive bay assembly upward to gain access to the cable connections.
3. Remove the front bezel by releasing the tab as shown.
4. Lower the drive bay assembly.
5. Remove the metal shield from the diskette drive bay by using a flat-blade
screwdriver to gently pry it loose.
6. Remove the plastic panel in the bezel by squeezing the plastic tabs that secure
the panel on the inside of the bezel.
7. Reinstall the front bezel.
8. Slide the diskette drive lock to the unlock position. See "Locating
components" on page 11.
9. Connect the flat cable to the new drive.
Chapter 1. Installing options
21