Selecting The Waveband / Memory Bank; Tuning Into A Station; Setting The Sensitivity Of Station Seek Tuning - Blaupunkt MUNCHEN MP36 Operating And Installation Manual

Radio mode
The RDS function is active when the RDS
symbol is shown in the display.
Switching REGIONAL on/off
u Press the MENU button 7.
u
Press the or
until "REG" appears in the display. "OFF"
or "ON" is displayed alongside "REG".
To switch REGIONAL on/off,
u
press the or
u Press the MENU button 7.
Selecting the waveband /
memory bank
You can use this device to receive pro-
grammes broadcast over the FM frequency
range as well as the MW and LW (AM) wave-
bands. There are three memory banks avail-
able for the FM waveband (FM1, FM2 and
FMT) and one for each of the MW and LW
wavebands. Six stations can be stored in
each memory bank.
To switch between the FM memory banks
(FM1, FM2 and FMT) and the MW and LW
wavebands,
briefl y press the BND•TS button <.
u

Tuning into a station

There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
u
Press the or
The radio tunes into the next receivable sta-
tion.
38
button 8 repeatedly
button 8.
button 8.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manually
if the RDS function is deactivated.
u or button 8.
Press the
Browsing through broadcasting
networks (only FM)
If radio stations provide several programmes,
you have the option of browsing through
their "broadcasting networks".
Note:
The RDS function must be activated
before you can use this feature.
u
Press the or
to the next station on the broadcasting
network.
Note:
When using this feature, you will only be
able to switch to stations that you have
received once before already. To receive
the stations, use the scan function or the
Travelstore function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good recep-
tion or whether it can also tune into those
with a weak reception.
u Press the MENU button 7.
u
Press the or
until "SENS" and the currently set value
appear in the display.
"SENS HI6" means that the tuner is set to the
highest sensitivity setting. "SENS LO1" means
it is set to the lowest sensitivity setting.
button 8 to switch
button 8 repeatedly