External Audio Sources; Technical Data - Blaupunkt MUNCHEN CD 51 Operating Instructions Manual

EXTERNAL AUDIO SOURCES

External audio sources
In place of the CD changer it is also
possible to connect other external au-
dio sources to the line output. These
sources can include a portable CD play-
er, MiniDisc player or MP3 player.
The AUX output has to be switched on
in the install menu.
To connect up an external audio source,
you will need an adapter cable, obtain-
able from any authorised Blaupunkt
dealer.
Switching the AUX input on/off
Press the MENU button 8.
"MENU" appears on the display.
Press the or
edly until "AUX-IN-1 OFF" or "AUX-
IN-1 ON" appears on the display.
Press the or
switch AUX on or off.
Press the MENU button 8 or OK
; once you have completed the
setting.
Note:
When the AUX input is switched on, it
can be selected using the CD•C button
@.
46
button : repeat-
button : to

TECHNICAL DATA

Technical data
Amplifier
Output power:
Tuner
Frequency ranges:
FM :
MW :
LW :
(München CD51 does not feature
MW and LW)
FM transmission range:
CD
Transmission range:
Pre-amp output
4 channels:
Input sensitivity:
AUX 1 input
Tel-/Navi input
Subject to changes!
4 x 25 watts sine
in accordance
with DIN 45 324 at
14.4V,
4 x 45 watts max.
power
87.5 - 108 MHz
531 - 1 602 kHz
153 - 279 kHz
35 - 16 000 Hz
20 - 20 000 Hz
3 V
: 2 V / 6 kΩ
: 10 V / 1 kΩ