Operating The Appliance - AEG Electrolux 88101K-MN User Manual

6

Operating the appliance

Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking directly in the base of
the cookware. The glass ceramic is merely heated by the residual heat of the cookware.
Operating the appliance
Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
Switch on
Switch off
After switching on, within approx. 10 seconds a heat setting or a function must be set,
otherwise the appliance automatically switches itself off.
Setting the heat setting
Increase
Decrease
Switch off
The keep warm setting
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function. The automatic warm-
up function sets the cooking zone to the highest setting for a certain period of time and
then automatically switches back to the cooking setting that was originally set.
Step
1.
2.
3.
4.
If during the automatic warm up
the automatic warm up is adjusted.
The length of time that the automatic warm up function operates depends on the heat
setting selected.
Control panel
Touch for 2 seconds
Touch for 1 second
Control panel
Touch
Touch
Touch and
lies between
Control panel
Setting the maximum setting
Place to one side for a moment
Touch
Touch in order to set the desired cooking setting
/
/ none
at the same time
and . It is used to keep food warm.
a higher heat setting is selected, e.g. from
Display Pilot light
lights up
goes out
Display
to /
to
Display
/
/
Until
seconds
/ after 3
to ,