Touch Control Sensor Fields; Residual Heat Indicator - AEG Electrolux 88101K-MN User Manual

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions are controlled by
touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor
fields which activate a desired function. Do not cover other sensor fields.
If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance
switches itself off.
Displays
-
-

Residual heat indicator

WARNING!
Risk of burns from residual heat. After being switched off, the cooking zones need some
time to cool down. Look at the residual heat indicator
Sensor field
On / Off
Increase settings
Reduce settings
Timer
Lock
Power
STOP+GO
Increase settings
Reduce settings
Display
Keep Warm settings
Heat settings
Heating setting plus
decimal point
Auto Warm-up
Fault
Pan detection
Residual heat
Child safety device
Power
Automatic Switch off
Description of the appliance
Switches appliance on and off
To increase Timer setting
To reduce Timer setting
Timer selection
Locking/unlocking the control panel
Switch the power function on and off
To switch the Keep Warm setting on and off
To increase heat setting
To reduce heat setting
The cooking zone is switched off
Keep Warm / STOP+GO function is switched on
To set heat settings
Intermediate heat setting is set
The Auto Warm-up function is switched on
Malfunction has occurred
Cookware is unsuitable or too small or no cookware
has been placed on the cooking zone
Cooking zone is still hot
Lock/Child safety device is set
Power function is switched on
Switch off is active
Function
Description
.
5