On/Off Button; Mains-On Light; Start/Pause Button; Delay Start Button - AEG ÖKO-LAVAMAT 1051 VI Instruction Booklet

Description of the appliance
Position E corresponds to the ENERGY SAVING programme at approx.
67°C for normally soiled laundry, extended washing time (cannot be
combined with STAIN and QUICK
Position corresponds to COLD WASH. To be used for extremely delicate
items.

ON/OFF button

Press this button to switch the machine on. Press it again to switch the
machine off.

Mains-on light

This light comes on when the ON/OFF button is pressed, and goes out
when it is pressed again.

START/PAUSE button

This button has three functions:
a) Start
After having selected the required programme, press this button to start
the machine; the corresponding pilot light stops flashing.
b) Pause
To interrupt a programme which is running, press the START/PAUSE
button: the corresponding pilot light and the light of the programme
phase which is running will start to flash.
To restart the programme from the point at which it was interrupted,
press the START/PAUSE button again.
c) Empty out water
At the end of a programme which ends with water in the drum (RINSE
HOLD option), or after the "soak" programme A, press the START/PAUSE
button to empty out the water: after the soak programme, the machine
will empty only; after RINSE HOLD programmes, the machine will empty and
spin.

DELAY START button

This button allows starting of the machine to be delayed from 1 hour
up to a maximum of 19 hours.
The button must be pressed after selecting the programme and
before pressing the START/PAUSE button
The figures indicating the required delay appear for about 2 seconds in
the display next to the button. The duration of the selected wash pro-
gramme is then displayed. One minute after depressing the
144
).
.
START/PAUSE button, the machine starts its countdown (every hour).
During the last hour, the remaining time is displayed every 5 minutes.
The delayed start function cannot be used with the SPIN F-G and
DRAIN programme D.
To modify or cancel the preset delay, press the START/PAUSE button,
then press the DELAY START button until the required value is displayed
or, if you wish to cancel the delay, until the symbol
Then press the START/PAUSE button again.
When the delay is cancelled, the display shows the duration of the wash
programme previously selected.

Programme Option buttons

Depending on the programme, different functions can be combined.
These must be selected after choosing the desired programme and
before depressing the START/PAUSE button.
When these buttons are pressed, the corresponding pilot lights come on.
When they are pressed again, the pilot lights go out.
If an incorrect option is selected, the pilot lights flash for about 3 seconds
and the message Err is displayed.

STAIN

To treat heavily soiled washing or stained washing with stain remover
(extended main wash with time optimised stain action phase, not selec-
table for wool and with temperatures lower than 40°C).

QUICK

By pressing this button the washing time is reduced. For use when
washing lightly soiled laundry.
This option is not available with the wool programme.

PREWASH

The machine performs a prewash cycle at 40°C max. The prewash cycle
ends with a short spin in programmes for Cotton and Synthetics, and
with emptying of the water only for Delicates.
This option is not available with the wool programme.
For use when washing heavily soiled laundry.
Important: the STAIN, PREWASH and QUICK WASH options cannot be
selected together: one automatically disables the others.
Description of the appliance
0 h is displayed.
145