Back Panel Controls And Connectors (Xs4300) - Crown Xs500 Operation Manual

3 Operation
3.4 Back Panel Controls and
Connectors (Xs4300)
A. Normal/Bridge Switch
(one per channel pair)
Two-position switch selects between normal
(stereo) operation and Bridge-Mono operation.
B. Circuit Breaker
Provides overload protection.
page 14
C. XLR-1/4" Combo Input Connectors
One per channel, XLR-1/4" combo connector
includes 3-pin female XLR connector and
TRS 1/4" phone jack. Accepts balanced or
unbalanced signals.
D. 5-Way Binding Post Output
Connectors
One pair per channel; accept banana plugs,
spade lugs or bare wire.
Xs Series Power Amplifiers
Note: Binding post outputs on European mod-
els come with safety plugs installed to prevent
European power-cord plugs from being
inserted. The top & bottom entry positions for
these connectors should therefore be used with
European models.
E. IEC Power Inlet
Operation Manual