Edimax EW-7438RPn User Manual page 11

Plug the Wi-Fi extender into a power outlet close to the root wireless
access point and switch it on (1). The extender will automatically
initialize.
In a few seconds, the Power LED
seconds later, the Wi-Fi LED
irregularly (2). This indicates initialization is complete. Please do not
proceed to the next step until these conditions are fulfilled.
You can establish a wireless connection via the hardware WPS button or
using the web UI interface.
If your broadband router or access point also has a WPS button, we
recommend using the WPS button to establish a connection. It is faster,
secure, and does not require a computer.
Using WPS button
Using web UI
(2)
(1)
( )
will light up. Approximately 30
( )
will begin to flash rapidly and
- please go to section 2-1-1
- please go to section 2-1-2
9