Edimax EW-7438RPn Air Quick Installation Manual
Hide thumbs
Also See for EW-7438RPn Air:
- User manual (142 pages) ,
- Quick installation manual (19 pages) ,
- Setup (7 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Edimax EW-7438RPn Air
Summary of Contents for Edimax EW-7438RPn Air
- Page 1 EW-7438RPn Air Quick Installation Guide 02-2014 / v1.0...
-
Page 2: Product Information
I. Product Information I-1. Package Contents - EW-7438RPn Air - CD with multi-language QIG & user manual - Quick installation guide (QIG) - Access key card I-2. System Requirements - Existing 2.4GHz wireless network - Computer with 2.4GHz 802.11/b/g/n Wi-Fi adapter, and web browser for ®... -
Page 3: Installation
Flashing WPS in progress Sleep Mode II. Installation Plug the EW-7438RPn Air into a power socket. The LED will flash while the system is booting up. The device is ready when the LED displays on (red). Use a Wi-Fi device (e.g. computer, tablet, smartphone) to search for a Wi-Fi network with the SSID “EdimaxEXT.Setup **”... - Page 4 Open a web browser and if you do not automatically arrive at the “Get Started” screen shown below, enter the URL http://edimaxext.setup and click “Get Started” to begin the setup process.
- Page 5 SSID instead. Refer to the user manual for more information. Please wait while the EW-7438RPn Air tests the connection. If your Wi-Fi extender cannot obtain an IP address from your existing router/access point then click the “Static IP” button to assign an IP address to the extender.
- Page 6 Please wait a moment until the extender is ready. A final congratulations screen will indicate that setup is complete. The EW-7438RPn Air is working and ready for use - the LED should display on or flashing blue depending on your signal strength. To download the...
- Page 7 Android: iOS: Please close the browser window. You can now connect to the extender’s new SSID on a wireless device within range such as a computer, smartphone or tablet. The password for your Wi-Fi extender’s SSID is the same as for your router’s SSID.
- Page 8 III. Reset the Extender If you experience problems with your extender or if you want to change the extender to a different operating mode, you can reset the device back to its factory settings. This resets all settings back to default. Press and hold the WPS/Reset button for at least 10 seconds until the LED is flashing red.
-
Page 9: Browser Based Configuration Interface
IV. Browser Based Configuration Interface After setup you can use the browser based configuration interface to configure advanced settings. To access the browser based configuration interface enter http://edimaxext.setup into the URL bar of a browser on a network device which is connected to the same Wi-Fi network as the extender. You will be prompted for a username and password. - Page 10 V. WPS If your wireless router/access point supports WPS (Wi-Fi Protected Setup) then you can use this method to setup your wireless extender. Press the WPS button on your wireless router/access point to activate its WPS. Please check the instructions for your wireless router/access point for how long you need to hold down its WPS button.
- Page 11 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 12 EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1995/95/EC, 2011/65/EC. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1995/95/CE, 2011/65/CE. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 1995/95/ES, 2011/65/ES.
-
Page 13: Declaration Of Conformity
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive 1999/95/EC, and directive 2011/65/EC(RoHS) . Equipment: N300 Smart Wi-Fi Extender Model No.: EW-7438RPn Air... - Page 14 Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
- Page 15 intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
- Page 16 Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6.