Yamaha YZF-R125 Service Manual page 59

YamahaR125.COM
1. Throttle body
2. Wire harness
3. Ignition coil
4. Spark plug lead
5. Sub-wire harness
6. Front brake light switch lead
7. Throttle cable
8. Right handlebar switch lead
9. Right headlight assembly lead
10. Left headlight assembly lead
11. Front brake hose
12. Main switch lead
13. Speed sensor lead
14. Radiator inlet hose
15. Radiator fan motor lead
16. Wire harness (to coolant temperature sensor)
17. Starter motor
18. Front turn signal light lead
A. Cover the sub-wire harness couplers with the
coupler cover.
B. Fasten the wire harness and sub-wire harness to
the guide with a plastic locking tie.
C. After connecting the wire harness to the left and
right headlight assembly leads, cover the couplers
with the coupler cover, and then fasten a plastic
locking tie around the end of the cover as shown in
the illustration.
D. Fasten the grommet on the speed sensor lead with
the holder.
2-36
CABLE ROUTING