Network Settings - Buffalo AirStation WLI-TX4-G54HP User Manual

◗
Automatic IP Assignment - This setting specifi es
the Ethernet Converter to obtain its IP Address from
a DHCP server on the network. Consult with your
network administrator regarding whether this device
should obtain its IP Address from a DHCP Server.
◗
Manual Assignment - This setting specifi es the
Ethernet Converter to operate on a specifi c IP Address.
This is often referred to as a Static IP Address. If a
manual assignment is preferred, then you will be required to enter an appropriate IP
Address and Subnet Mask for the Ethernet Converter.
■
NOTE: The IP Address is required for confi guring the Ethernet Converter. Be
careful when changing its address, as it may cause undesired operation. Also, please
document any changes and update any browser bookmarks that may be referencing
the Ethernet Converter Web Based Confi guration.
◗
The Ethernet Converter Manager may be used to set the IP Address in the event of
changing the IP Address inappropriately.
◗
The IP Address does not need to be in the range of the DHCP server's scope to
successfully pass DHCP requests to network clients behind the Ethernet Converter.
19

Network Settings