Brother PT-9200DX QUICK REFERENCE Quick Reference page 16

0 In the next Add New Hardware Wizard dialog box,
which allows you to select how to search for the
driver, select "Search for the best driver for your
device. (Recommended)", and then click the Next
button.
A Select only "Specify a location", and then click the
Browse button.
B In the Browse for Folder dialog box that appears,
specify the folder
"d:\ptouch\driver\pt9200dx\win98" (where "d:" is
the name of the drive containing the P-touch Editor
CD-ROM), and then click the OK button.
C Check that the correct path appears in the "Specify a
location" box, and then click the Next button.
D Check that "d:\ptouch\driver\pt9200dx\win98\p···"
(where "d:" is the name of the drive containing the P-
touch Editor CD-ROM) appears below "Location of
driver", and then click the Next button.
Installation of the driver begins.
E In the dialog box that allows you to select the USB
port where the PT-9200DX is connected, select
"PTUSB: Brother PT/CP USB Port", and then click the
Next button. (If two or more PT-9200DX models are
connected through their USB ports, finish the installa-
tion, and then change the port to "PTUSB (PT-
9200DX-XXXXXXXXX):" (where XXXXXXXXX is the
serial number).)
F In the dialog box that appears, allowing you to check
the name of the printer, change the printer name if
desired, specify that this printer will not be the default
printer, and then click the Finish button.
13