Installing Software: For Windows Me And Windows 98 Se Operating Systems Only - Jabra GN 8120 User Manual

Plug the USB connector from the GN 8120 USB into an available USB port on the com-
puter. The first time Windows detects that the device is connected, it recognizes that
there is new hardware required and automatically launches the Add New Hardware
Wizard.
Windows Me:
The Add New Hardware Wizard will launch one (1) time, installing the following
driver:
• USB Audio Device (INF\WDMA_USB.INF).
Windows 98:
The Add New Hardware Wizard will launch three (3) times, installing the following
drivers:
• USB Composite Device (INF\USB.INF)
• USB Human Interface Device (INF\HIDDEV.INF)
• USB Audio Device (INF\WDMA_USB.INF)
This driver is typically pre-loaded in Windows. No additional software is needed. If you
upgraded your system to Windows Me, you may need to use the upgrade disk during
this installation.
4. Installing software: for Windows Me and Windows 98
SE operating systems only
Plug the USB connector from the GN 8120 USB into an available USB port on the com-
puter. The first time Windows detects that the device is connected, it recognizes that
there is new hardware required and automatically launches the Add New Hardware
Wizard.
Add New Hardware Wizard (1) - USB Composite Device (Windows 98 SE
Installation)
1. The Add New Hardware Wizard indicates that it has found the new USB Compos-
ite Device. Click Next.
2. The Wizard prompts you to search for the best driver for your device or select the
driver you want from a displayed list (2). Select Search for the best driver for your
device. Click Next.
3. Windows now searches for new drivers in a specific location (3). Uncheck all the
boxes. Click Next.
4. The Wizard indicates that it is ready to install the best driver for this device (4).
Click Next to install the driver.
5. Click Finish when the Wizard is complete.
6