Setting The Aeb; Setting The Af Area; Setting The Af Lamp - Polaroid t1234 User Manual

Icon Item
Sets a 10-second delay to capture your image after pressing
10 Sec Self-timer
10
the shutter button.
Sets a 2-second delay to capture your image after pressing
2 Sec Self-timer
2
the shutter button.
Performs delay and capture twice:
• Performs a 10-second delay, then captures the image.
2
Double Self-timer
x
• Performs another 2-second delay then captures the image
again.
Performs continuous shooting when the shutter button is
Burst
pressed. Stops shooting when the shutter button is released.
Off (Default) Captures an image without time delay.

Setting the AEB

AEB stands for Automatic Exposure Bracketing. This feature captures the
same image with 3 different exposure settings.
• The settings are recorded in the following order: standard exposure,
under exposure, and over exposure.
• Available settings are: [On] and [Off].
To set AEB
1. From the Record menu, select AEB.
2. Use the or keys to go through the
selection.
3. Press the OK button to save and apply
changes.
46
Description
Record Mode
Drive Mode
OFF
AEB
OFF
On
AF Area
Off
OFF
AF Lamp
Sharpness
Polaroid t1234 Digital Camera User Guide
www.polaroid.com

Setting the AF Area

AF stands for Automatic Focus. This feature determines the area on which
the camera focuses.
To set AF Area
1. From the Record Menu, select AF Area.
2. Use the or selection.
3. Press the OK button to save and apply
changes. The table below shows the
available AF area settings.
Icon Item
The camera automatically detects the position of a face
Face Tracking
and sets the focus.
The camera automatically selects focus area within the
Wide
wide frame.
Center The focus area is fixed on the center

Setting the AF Lamp

The AF Lamp function allows you to record
images even in low light conditions.
If AF Lamp is set to Auto, the AF lamp located
in the front of the camera, see "Front View" on
page 12, emits a red light by pressing the
shutter button halfway down that allows the
camera to focus easily. Available settings are:
[Auto] and [Off].
To set AF Lamp
1. From the Record Menu, select AF Lamp.
2. Use the or keys to go through the selection.
3. Press the OK button to save and apply changes.
Polaroid t1234 Digital Camera User Guide
www.polaroid.com
Record Mode
Drive Mode
OFF
Face Tracking
AEB
OFF
Wide
AF Area
Center
AF Lamp
Sharpness
Description
Record Mode
Drive Mode
OFF
AEB
OFF
AF Area
Auto
AF Lamp
OFF Off
Sharpness
47