Using The Stabilizer; Setting The Zoom Control; Using Flash - Polaroid t1234 User Manual

• Using the image Stabilizer
The Image Stabilizer function
prevents blurred images caused
by shaking. This function is only
available if ISO is set to Auto.
See "ISO" on page 38 on how to
adjust the ISO settings.
To activate the image Stabilizer
Press the Image Stabilizer
button on top of your
12M
camera to enable/disable
the image stabilizer.
If the Image Stabilizer
is enabled, the image
stabilizer icon is displayed
on the LCD display.

• Setting the Zoom Control

Your camera features up to 3x optical zoom and up to 5x of digital
zoom.
1. Press the Zoom buttons to zoom in or
zoom out an image.
2. The zoom indicator appears on the LCD
onitor.
To adjust the zoom:
32
Stabilizer button
307 307
Stabilizer on.
Press to zoom in.
Press to zoom out.
Zoom buttons
Polaroid t1234 Digital Camera User Guide
www.polaroid.com
1. Press the button to optically zoom in to the maximum until it stops.
2. Release the button.
3. Press the button again to switch to digital zoom automatically.
Zooming continues.
x5.0 x5.0
Optical zoom
307 307
12M
0.0EV 0.0EV
AUTO
NOTE:
• Digital zoom is not activated in recording movies.

• Using Flash

When taking pictures in difficult lighting conditions, use the Flash to
get correct exposure. This function cannot be activated when recording
movies or continuous shooting.
To activate Flash:
• Press the Flash/Right button on your camera
repeatedly until your desired flash mode is
displayed on the LCD monitor.
Polaroid t1234 Digital Camera User Guide
www.polaroid.com
Digital zoom
307 307
x5.0 x5.0
12M
0.0EV 0.0EV
AUTO
Flash button
33