Advertisement
DESCRIPTION
1.
Suction inlet
2.
Dustbag full indicator
(model 2115)
3.
Variable power control (model 2115)
4.
On/off switch
5.
Cable rewind button
6.
Wheel
7.
Dustbag compartment
8.
Carrying handle
9.
Compartment open button
IMPORTANT SAFEGUARDS
>
Read this instruction booklet carefully.
>
Before using the appliance, check that the mains power voltage corresponds to the voltage
shown on the rating plate.
>
Do not switch the appliance on if it appears to be faulty in any way or it has a damaged cord or
plug. Do not try to repair the appliance by yourself. For repairs or accessories, contact Electrolux
Customer Services on 08706 055 055.
>
Always remove the plug from the power socket when the appliance is not in use and before
carrying out any cleaning or maintenance operations.
>
Never leave the appliance unattended when it is switched on. Keep the appliance out of reach of
children.
>
This appliance is for domestic use only. Use as described in this instruction booklet.
>
Do not pull the appliance by the cord. Do not unplug by pulling on the cord.
>
Do not use appliance on wet surfaces or to vacuum liquids, mud, ash and burning cigarette
butts. Do not vacuum up any highly flammable or explosive substances or gases.
>
Do not unplug the vacuum cleaner with wet hands.
>
Do not operate the vacuum cleaner too close to heaters and radiators, stoves etc.
>
Before you start using the vacuum cleaner, please remove large or sharp objects from the floor
to prevent damage to the cloth dustbag.
INSTRUCTIONS FOR USE
?
Before placing into operation make certain that the filters are in the proper position.
?
Before using the appliance, unwind a sufficient length of cable and insert the plug into the power
socket. A YELLOW mark on the power cable shows the ideal cable length. Do not extend the
cable beyond the RED mark.
?
Press the ON/OFF button to switch the appliance on. It is advisable to set the power control to
MIN before switching on the appliance (model 2115).
?
To rewind the power cable, press the rewind button with foot, and guide the cable with hand to
ensure that it does not whip causing damage.
?
By moving the variable power control, the suction power can be adjusted.
IFU inside of 21-serie
2105 · 2115
10.
Hose
11.
Plastic tubes
(model 2105)
12.
Metal tubes
(model 2115)
13.
Floor nozzle (model 2105)
14.
Dual purpose floor nozzle
(model 2115)
15.
Upholstery nozzle
16.
Crevice nozzle
17.
Dustbag
18.
H
orizontal p
arking
(model 2115).
-
2
-
The Global Appliance Company
MAINTENANCE
REPLACING THE DUSTBAG
?
Always operate the cleaner with the dustbag installed.
?
If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not close
completely.
?
After removing the flexible hose, open the front cover
?
Remove the support of the bag.
?
Remove the dustbag and insert a new one
?
Close the cover by pressing down until it clicks
?
Dustbag reference number Electrolux E67.
REPLACING THE FILTERS
?
The dustbag must be replaced if the window of the dustbag full indicator is completely red when
the cleaner is operating at maximum power and the nozzle is raised from the floor.
?
Filters should be replaced at least twice a year or when they become visibly soiled.
?
Always operate the cleaner with filters installed to avoid reduced suction.
?
Disconnect from electrical outlet before changing the filters.
?
Do not use a washing machine to rinse filters.
?
Pull dustbag upward and remove the motor protection filter with grill
?
Remove the filter from the grill
(fig. 22)
.
?
Place a new filter into the grill and put it back into the cleaner.
?
Open the filter grill to remove the exhaust filter
?
Take the filter out of the grill
(fig. 24)
.
?
Place a new exhaust filter into the filter grill
?
Close the filter grill
(fig. 26)
.
PROTECTING THE ENVIRONMENT
?
Attempt to recycle packaging material and old appliances.
?
The cardboard packaging can be placed in the waste paper collection.
?
Deposit the plastic bag made of polyethylene (PE) at the PE collection point for recycling.
Recycling the Appliance at the end of its life
?
The plastic components all carry a material identification marking so that, like the other materials,
they can recycled at the end of the life of the appliance.
?
Please inquire with your local authority.
Blocked air flow and dirty filters:
?
The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are
blocked with dirt.
?
Disconnect from mains and allow the cleaner to cool for 20-30 minutes. Remove blockage and/or
clean filters.
?
Restart the cleaner.
(fig. 19)
.
(fig. 20)
.
(fig. 19)
.
(fig. 21)
.
(fig. 23)
.
(fig. 25)
.
:
-
3
-
Advertisement
