AEG COMPETENCE B3140-1 Operating Instructions Manual page 43

Replacing the centre glass plates
1. From above, insert the centre plates
obliquely into the retaining frame
at the handle, one after another.
2. Lower the centre plates down and
push them towards the lower edge
of the door as far under the retain-
ing frame as they will go.
Replacing the upper glass plate
1. From above, insert the upper-most
plate obliquely into the retaining
frame at the handle.
2. Lower the plate. Place the glass
against the pressure spring at the
handle, and in front of the retaining
frame at the lower edge of the door.
Push it into the frame.
The glass plates must be firmly at-
tached.
Re-attach the door to the oven
43