Unpacking; Contents Of Carton - GMC RM1000 Instruction Manual

WARNING. After switching off the machine, the cutting
device continues to rotate for a few more seconds.
• Only use the original type of nylon line. Under no
circumstances use metal line instead of nylon.
• Do not use the machine to cut grass which is not on the
ground. For example, do not cut grass which is on walls
or rocks.
• Do not switch on the machine in enclosed or poorly
ventilated spaces or in the presence of inflammable
and/or explosive substances such as liquids, gasses
and powders.
• Only cut during broad daylight or with adequate
artificial light.
• Check that all grass cuttings and dirt have been removed
from the ventilation vents.
• Do not cross roads or gravel paths with the machine
still running.
• When the machine is not in use, store it in a dry place
and out of reach of children.
• After use, disconnect the machine from the power supply
and check for damage. If you have the slightest doubts,
contact an authorised service centre.
• Only use the machine according to the instructions given
in this manual.
• Check regularly that the screws are tight.
• Do not try to repair the machine or access internal parts.
Contact authorised service centres only.
• Do not get distracted and always concentrate on what
you are doing. Use common sense. Never operate the
machine when you are tired, sick or under the influence
of alcohol or other drugs.
Wear goggles
Wear ear defenders
Wear a breathing mask

Unpacking

Due to modern mass production techniques, it is unlikely
that your power tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.

Contents of carton

• Secondary handle with clamp nut and locking knob
• Safety guard (2 parts)
• 5 Safety guard fixing screws
• 2 Guard washers (1 split, 1 flat)
• Carry strap
6